Creative Sound Blaster X-Fi Surround 5.1 Pro v3
User’s Guide
Creative Sound Blaster X-Fi Surround 5.1 Pro v3
User’s Guide
15
3
Synthesizer
4
Analog Audio Cable (Available separately)
5
Microphone
Notes
:
•
Mic In will override Line In if both are connected simultaneously.
•
To listen to the audio from the source connected to the Line In or Mic In jacks:
i.
In the
Mixer
selection of Entertainment Console, unmute the
Line
In/Mic In
input.
1.5.5 Watching DVDs
You can set up a PC home entertainment system using your audio device.
Watch DVDs on your PC and decode Dolby Digital signal from your audio
device through a Dolby Digital external decoder or an AV Amplifier.
Connect the digital input of your external decoder or AV Amplifier to the
Optical SPDIF Out connector of your audio device. For more information on
external decoder or AV Amplifier speaker connection settings, consult the
User's Guide of your external decoder or AV Amplifier.
Component
1
Optical Cable (Available separately)
2
External Decoder, AV Amplifier or Home Theatre Receiver