Creative Sound Blaster X-Fi Surround 5.1 Pro v3
User’s Guide
Creative Sound Blaster X-Fi Surround 5.1 Pro v3
User’s Guide
24
1.9 Troubleshooting
This section provides solutions to problems you may encounter during
installation or normal use. This includes:
•
Problems with Sound
•
Problems with Simultaneous Playback/Recording
1.9.1 Problems with Sound
No sound from headphones.
Check the following:
•
The headphones are connected to the Headphone jack
•
In the
Speakers
tab of Audio Control Panel, the
Headphones
option is
selected in the
Speaker Configuration
box.
OR
In the speakers and headphone selection of Entertainment Console, the
Headphones
option is selected.
No audio output when playing digital files such as .WAV, MIDI files or
AVI clips.
Check the following:
•
The speakers' volume control knob, if any, is set at mid-range. Adjust the
volume mixer settings in Entertainment Console, if necessary.
•
The powered speakers or external amplifier are connected to the Line Out
jacks.
•
The speakers and headphone selection in Entertainment Console
corresponds to your speaker or headphone configuration.
No audio can be heard from the Line In or Mic In jack source when doing
recording.
Do the following:
•
In the
Mixer
selection of Entertainment Console, unmute the
Line In/Mic In
input.