3-4 Using WebCam Go as a Portable Camera
4. Aim the camera at the desired object, using the camera’s viewfinder to verify that the object
is in the camera’s view.
5. Hold the camera still and press the Snapshot button.
6. Continue holding the camera until the Camera busy LED (red light) goes off.
The picture(s) is(are) taken and stored in the camera’s memory.
Also, the counter value is decreased by at least one.
7. To take another picture, repeat steps 4 through 6.
8. To switch off the camera, press the Off button and hold it down for 2 seconds.
Downloading
Pictures from
WebCam Go
After taking pictures, use the application, WebCam Go Control, to download the pictures.
WebCam Go Control displays the pictures stored in the camera in thumbnail view and you can
select those that you want and download them into your computer.
• When the counter value
reaches “000”, you cannot take
any more pictures until you
have cleared the camera’s
memory by deleting existing
pictures.
• The camera will turn itself off
automatically if it’s left idle
after a specified amount of
time.
Summary of Contents for Video Blaster WebCam Go
Page 1: ...User s Guide...
