10、Maintenance
1. Place the machine vertically after cleaning, do not place it horizontally or upside down.
2. During cleaning, do not damage the components insidethe machine. Once the
components are damaged, please ask specialist to check and repair. Do not attempt
unauthorized repairs to avoid accidents.
3. Abandon old water after each use, and fill with freshwater next time. If the water is
reused many times, some mineral substance may subside or adhere to the surface of
the components, thus influence the machine performance.
4. When you notice the discharge capacity reduce obviously or the machine’s
components have much ash and dirts, please disassemble the back cover of the machine
to clean the heat tube and probe, it is better to clean every 20 times or 100 hours working.
(1. Use the tool to remove the two (2. Pull out the main body and
quick-release screws on both sides) clean the internal components)
5. Better not use hot machine in cool water. It should be cool down the machine to room
temperature and put into cool water to use. Otherwise it will influence the machine function
and lifetime. On the contrary, please do not put cool down machine into hot water to use.
-10-
English
