11、How to Clean
Preparation:
Food grade vinegar (white vinegar, apple vinegar, etc.)
Why need to clean:
Normally tap-water contains minerals in our life. When the water is heated to a certain
temperature, there will be scale on the heater or surface of the machine. In this case,
the scale will affect the performance of the machine, and the machine is not good in
outlook as well. So we suggest you cleaning the machine after every 20 times use, and
accumulated working time is less than 200 hours. Or you can clean the machine
according to your actual needs due to different water in different place.
How to clean:
1. Pour water into the container till the “MAX” line of the machine. Add 5g vinegar
into the water. (Attention: when adding the vinegar, if the vinegar touches with your
eyes because of careless, please clean your eyes with a lot of water. And turn to a doctor
if needed!)
2. Turn on the machine, set the working temperature in 80℃ (176°F), working time in 3
hours (03:00) , and click ”START/STOP”, After 3 hours, the machine will beep, and
then cut off power.
(*Quick cleaning procedure: long press“START” and “-” two buttons, digital tube
(B) will be show the set temperat
ure 80 ° C, the
digital tube
(C) will be show the set time
3:00, then release the hand, digital tube (B)&(C) w
ill be blink 10 times. If you need switch
the °C or °F , click the “°C / °F “ to change, if not need, Click the “START” bu
tton to
start the cleaning operation.
-- -- Press and hold "+" and "-" during work, the small digital tube shows the remaining
cleaning time, and let go off the viewing mode when you release the hand).
3.Check if the
machine is clean enough. If not, you can add vinegar to the machine
again and run the machine as stated in the above step No. 2. If the machine is clean
enough, please drain the vinegar from the machine, wash the machine with fresh water,
then dry it and storage it well.
-11-
English
