5、Product Function
-5-
English
1. °C/°F Temperature unit switch button
-- -- Click on " °C / °F" to select the temperature display unit of the machine.
There are two temperature units: Celsius and Fahrenheit.
2. START Start work button
-- -- In the standby mode, click "START", the machine starts working, [Fever
sign and water cycle mark starts to flash].
-- -- During the work, click "START" and the machine starts counting down.
3. Stop
Stop button
-- -- During the work process, click “STOP”, the machine stops working [the
internal fan will continue to work for 30 minutes, which is normal phenomenon].
4. TEMP / TIME
Temperature, time adjustment switch button
-- -- Click "TEMP / TIME" to toggle the temperature or time setting. When the
temperature digital tube (B) is flashing, set the desired target temperature
with “+” and “-”; when the time digital tube (C) is flashing, the desired
target time can be set with “+” and “-”.
*
After the digital tube flashes 10 times, if there is no setting operation, the
machine will exit the temperature/time setting state. If you need to reset it,
click “TEMP / TIME” again to enter the setting state.
*
In the working mode, press and hold the “TEMP / TIME” button, the digital
tube displays the time and temperature that have been set.
5. + -
Adjustment button
-- -- Click on "TEMP / TIME" to select the content (temperature or time) to
be adjusted, then use the "+" and "-" buttons to adjust to the desired
temperature or time.
