CREATOR CHINA
2011-08
WWW.CREATOR1997.COM
7
Professional SDI/DVI/HDMI Switch Scaler User’s Manual
item to be set, and then press “ENTER” key to
confirm enter;
Step
Step
Step
Step 3,
3,
3,
3,
press “▲ and ▼” key or PARAMETER
knob to move up/down or left/right to select the
parameter
for
the
item
to
be
set,
and
corresponding
parameter
information
will
be
shown by turns on the LCD display upon every
pressing;
After entering the parameter setting menu,
the current status of the item to be set in the
system will be shown as the first parameter
information;
Step
Step
Step
Step 4,
4,
4,
4,
after selecting the needed parameter,
press “ENTER” key to confirm selection;
Step
Step
Step
Step 5,
5,
5,
5,
if it is necessary to set multiple
parameters, then after confirming each parameter,
press “MENU” key to return to the menu of the
upper level, and simply repeat the operations in
Step 2, 3 and 4.
2.4.4
2.4.4
2.4.4
2.4.4 Example
Example
Example
Example of
of
of
of Operations
Operations
Operations
Operations
E.g.:
Set
the
output
resolution
as
1280X1024@60Hz, and set contrast to 5.0.
1
、
Press “MENU” key to enter menu setting, and
on the LCD display it is shown as follows;
2
、
Press “MENU” key to enter menu setting, and
use the “▲▼” key to select the parameter for the
“OUTPUT Format”;
3
、
Press “ENTER” to confirm setting, and enter
parameters setting. At this moment, on the LCD
display shows the current status of the item to be
set. Use the “▲▼” key to search for the
parameter 1280X1024@60Hz;
4
、
Press “ENTER” to confirm change, and the
parameter information is shown on the LCD
screen after successful setting;
5
、
Press “MENU” key to return to the upper menu,
and use the “▲▼” key to search for the item
“Adaptive Contrast” to be set;
6
、
Press “ENTER” to confirm setting, and enter
parameters setting. At the moment, the LCD
display should show the current status of the item
to be set. Use “PARAMETER” knob to roll
left/right to set to the required parameter “5.0” and
finish setting.
