２６
Maintenance and Troubleshooting
Camera Maintains
If camera is not used for long time, please turn off power switch, adapter switch and AC plug.
Use soft cloth or tissue to clean the camera cover.
Use soft cloth to clean the lens; Use neuter cleanser if bad smeared. No use strong or
corrosive cleanser or corrosive cleanser avoiding scuffing.
Unqualified Application
No shooting extreme light object, such as sunlight, lamplight etc.
No operating in unstable light environment, otherwise image will twinkle
No operating in radio wave with great power environment, such as TV station or Wireless
Launcher etc.
Image effective will be not good when the light is not accordant with camera’s lux.
Troubleshooting
Image
No image
1, Check whether the power cord, voltage is OK, power indicator light is ON.
2, Turn off the power supply to check whether the camera can auto configure.
3, Check the dial switch in bottom and make sure the two dial position are all on OFF.
4, Check video and TV wire is connected correctly.
Abnormal display of image
Check the video connecting wires is well and other connecting sockets and camera
flat wires are well.
The camera can only works at one focus, other position can not be focused.
Change the position to see if this phenomenon still exists. If yes, it may be caused by
Camera control drive focus control system trouble.
Image dithering when at Maximum Zoom
1. Check whether camera is fixed correctly.
2. If there is vibrative mechanical object.
Remote Controller
1. Change the battery
2. Check the camera operation mode is right.
Terminal
1. Check the camera operation mode is right.
2. Check control wire is connected correctly.
All right reserved @Minrray Industry Co., Ltd
