CREATOR CHINA 2013-08 WWW.CREATOR1997.COM
7
Handheld Wireless Programmable Touch Screen User's Manual
Figure 2-7
4.The Default button is used to restore the factory
settings for current page.
5.Click the exit icon or Return button on the upper
right corner to return to the main interface
settings.
2.2.3 WiFi
1.It will search AP in the vicinity when enter the
WiFi setup interface, just wait, after the search
interface will be as shown in figure 2-8:
Figure 2-8
Note:
Sometimes it will display cannot search
information about AP, then press Refresh to
research.
2.IP Address, Subnet Mask, Router, DNS are
correspond to their own IP information of touch
screen. Controller
IP corresponds to the IP
address of controller
PGM
Ⅲ
. Please confirm
the IP address before connecting the controller.
3.If you need to modify the IP information simply
click on the corresponding region, pop-up
keyboard and then input the IP address required
to modify, as shown in figure 2-9:
Figure 2-9
click keyboard "Enter" key to confirm the input
and exit the keyboard, if do not want to modify,
click the keyboard "Quit" to exit.
4.Select the corresponding AP hot spots to
connect, as shown in figure 2-10:
Figure 2-10
If AP hotspots selected had succeeded in
establishing a connection, directly click "Enter", or
else, enter the correct AP password to connect.
If you need to view the AP hotspot code, click the
Edit area.
Note:
1).When there are 2 or more APs with the same
name, please be sure to set different passwords
for them. If one is not set password, may lead to
other APs cannot be connected properly.
2).When AP hotspot is in the "WEP" password
type, the system defaults connecting to key1,
please set a password in key1 of AP hotspot,
otherwise normal communication cannot be
