Creavit WQ Smart Pan, Manual

FUNCTION DESCRIPTION OF MAIN UNIT BUTTONS

Operation instructions of main unit buttons

1. Long press the “STOP” button (for about 3s), the main unit will

enter power-off mode (red light will turn off). Long press the

“STOP” button again, the main unit will return to working mode

(red light will turn on). In power-off mode, all buttons cannot be

used except the “STOP” button on main unit.

2. While sitting on the unit, a short press to the “STOP” button

can stop the ongoing front/rear cleaning or drying function.

While not sitting on the unit, a short press to the “STOP”

button can switch between working mode(red light) and

energy saver(blue light).

While sitting on the unit, press “Dry” button to activate the drying

function. Press “STOP” button to stop drying. It’ll stop automatic

-ally after one cycle if the “STOP” button is not pressed.

While sitting on the unit, press “FRONT/MOVE” button to activate

front cleaning. During the front cleaning process, press “FRONT/

MOVE” button to activatethe front massage cleaning function.

Press “STOP” button to stop cleaning.

1. While sitting on the unit, press “REAR/MOVE” button to activate

rear cleaning. During the rear cleaning process, press “REAR/

MOVE” button to activate therear massage cleaning function.

Press “STOP” button to stop cleaning.

2. While not sitting on the unit, short press “REAR/MOVE” button,

the wand will extend outward to allow access for cleaning. After

cleaning is completed, short press “STOP” button to retract wand.

Tips:

1. In working mode, the power light is on and Energy Saver light is off. In Energy Saver mode, the power light is off

and Energy Saver light is on. In standby mode, all lights are off.

2. All function settings are set to the middle level by default. Once the settings are changed by remote control or main

unit buttons, these settings will be saved and stay unchanged for the next use.

creavit.com.tr