6
3
Station Mode Programming Instructions
** Make sure to write down all the new codes you create for future use.**
Change the Master Code (6 Digits) using the Factory Master Code
1.
Push the black program button (located on the side of the lock) 5 times
2.
Enter the factory master code (135243) 2 times
3.
Enter your new master code (must be 6 digits long) 2 times.
4.
The lock will blink 6 times to indicate that the factory master code was erased
and your new master code was accepted.
Change the Supervisor Code (3-6 Digits) using the Factory Supervisor Code
1.
Push the black program button 1 time
2.
Enter the factory supervisor code (123) 1 time
3.
Enter your new supervisor code (must be 3-6 digits long) 1 time
4.
Push the black program button 1 time
5.
The lock will blink 6 times to indicate that the factory supervisor code was erased
and your new supervisor code was added.
Add a User Code (3-6 Digits) using the Supervisor Code
1.
Push the black program button 2 times
2.
Enter your supervisor code 1 time
3.
Enter the new user code 1 time
4.
Push the black program button 1 time
5.
The lock will blink 6 times to indicate that your supervisor code was used to add
the new user code
Change your current Master Code (6 Digits)
1.
Push the black program button 5 times
2.
Enter old master code 2 times
3.
Enter new master code 2 times
4.
The lock will blink 6 times to indicate that old master code was erased and
new master code was accepted.
