Figure 1
seat assembly
Figure 2
Rod holder
Diagram
Fig. 3
Detail of snap Pin
installation
All frame parts attach with
Snap Pins.
Your frame assembles using
(8) Short Snap Pins. Please
follow instructions accordingly.
Seat
Bottom
Left
Frame
Member
Cargo
Deck
Rod Holder
Shown attached to the
left side of boat.
Side
Storage
Pocket
Front
View
Bottom
View
Seat
Back
Seat Bottom
Seat Screws
Seat Pins
Seat
Screw
Holes
FORWARD
Lift and Lock
Anchor System
VI. ATTACH SIDE STORAGE POCKET TO FRAME
1. Position Side Storage Pocket along Left Frame Member or Right Frame Member. (see figure 5)
2. Wrap straps around upper rail of frame and strap down. .
.
VII. ATTACH STRIPPING APRON
1. Position Stripping Apron along Left Frame Member or Right Frame Member. (see figure 5)
2. Wrap straps around upper rail of frame and strap down.
VIII. ATTACH ROD HOLDER TO FRAME
1. Rod Holder attaches to frame using Snap Pin where Cargo Deck and Frame Members meet (can be attached to
left or right side).
X. ATTACH ANCHOR LINE STORAGE BAG
1. Anchor Line Storage bag attaches to front of Seat Support Frame Member (see figure 10).
XR 9-2009:new odc 1018 revised 2/17/10 9:11 AM Page 3
