Inflating Your Creek Company ODC 420
™
VALVES
The ODC 420™ features the Pro Series Push Button Valve on the main bladders (see illustration 3). To open the Pro Se-
ries Valve, first remove the valve cap. Then press down on the spring-loaded valve stem and turn it counter-clockwise 1/4
turn. The valve stem is now locked down in the open position, allowing air to move freely in and out through the valve. To
close the valve, push down on the valve stem and turn clockwise 1/4 turn. The stem will pop back up, sealing the valve
shut. In the closed position, you can still pump air into the chamber, but when you remove the pump, the valve will not al-
low air to escape. When you’re done, screw the plastic valve cap back on to keep water and dirt out of the valve.
INFLATION
Unscrew the plastic Valve Cap (see illustration 3) on the Pro Series Push Button Valve. Push Down on the Valve Stem
and turn ¼ turn clockwise so the Valve Stem pops up into the closed position. Using any standard double action hand
pump (not included) and adaptor (included), insert the adaptor into the valve and turn clockwise ¼ turn, locking the
adaptor in place. Connect the pump/pump adaptor to the Valve Adaptor and inflate until firm. Do not overinflate. When
the tube is fully inflated, you’ll notice all the wrinkles in the cover will flatten out.
To deflate the tube
, push down on the Valve Stem and turn it counter-clockwise ¼ turn. This locks the valve open for
deflation.
Features found on your Creek Company ODC 420™
(see Illustrations 1,2 and 3)
1. Pro Series Push Button Valves
2. Insulated Drink Holder
3. Carry Handles (top & bottom)
4. D-rings to attach Pack Straps (Pack Straps not included).
5. D-Rings to attach gear (two on nose of Pontoons and two on outside
of Pockets).
6. Pockets with five separate storage areas plus mesh for additional
storage.
7. Foam Fly Patch for drying and storage of flies.
8. Stripping Apron for collecting your fly line.
9. Adjustable Seat Back for comfort
10. Handy Ruler on Stripping Apron to measure fish.
11. Grommets for water drainage
Valve Cap
Spring
Loaded
Valve
Stem
ILLUSTRATION 3
Pro Series Push
Button Valve
Carry Handle
Seat Bottom
Seat Back
Stripping Apron
Stripping Apron
Foam
Fly
Patch
D- RIngs to
attach optional
Pack Straps
(Pack Straps
not included)
Grommets
ILLUSTRATION 1
top view
ILLUSTRATION 2
bottom view
Drink
Holder
Pro Series Push
Button Valve
D- RIngs
Pro Series Push
Button Valve
Grommets
D- RIngs
HIN Location
