background image

ODC SUPERSPORT XR

OUTDOOR DISCOVERY CRAFT

Warning:

Please read and follow carefully.

1.

Always wear a US Coast Guard approved personal flotation device when in your ODC SUPERSPORT XR

.

2.

Never float  alone.

3.

Always check your ODC SUPERSPORT XR

Air Bladders, outer skin and stitching for possible damage before you use your craft.

4.

Never use your craft if you suspect the Air Bladders, outer skin or stitching has been damaged.

5.

Never overinflate your ODC SUPERSPORT XR

.

6.

Never use your ODC SUPERSPORT  XR

without the Pontoons fully inflated.

7.

Your ODC SUPERSPORT XR

is not designed for use in salt water.

CARE AND MAINTENANCE:

1.

If your Pontoon Bladder is losing air, please check that Valve Assembly and Top Valve Cap are fully seated.  Reseat valve
assembly and repeat pontoon inflation instructions.

2.

Do not store your ODC SUPERSPORT XR

in direct sunlight.

3.

If you are leaving your ODC SUPERSPORT XR

out in the sun for any amount of time, be aware that the heat can increase the

pressure  inside the Pontoons to a dangerous level.  Let some of the air out of the pontoons if the craft will be out of the water in the
sun for any length of time, or if it is stored in a vehicle, etc.

4.

A gain in altitude will increase the pressure in the Pontoons also. If you are taking your inflated ODC  SUPERSPORT XR

from a

low elevation to a high elevation, be sure to let some of the air out of it.

5.

For short term storage, we recommend you let some air out of your pontoons.

6.

For long term storage, we recommend you make sure your ODC SUPERSPORT XR

is completely dry, deflated and stored out of

the sunlight in a cool dry area.. Do not store your wet ODC  SUPERSPORT XR

in freezing temperatures as this may result in

Frame and other component damage.

7

. Repairing Bladder, use enclosed patch kit.  Identify puncture.  Fully deflate Bladder.  Clean and dry area around puncture.  Apply

glue to puncture area and patch using applicator straw.  Press patch over puncture area.  Allow 24 hours to dry, before inflating.

8.

Note: Metal parts may rust and are not covered under warranty.

TM

your OdC Outdoor discovery Craft

is designed to give you many years of service.

Please follow inflation instructions and warnings carefully.

IF yOU EVER HAVE ANy qUESTIONS OR PROBLEMS WITH yOUR OdC  SUPERSPORT XR

 

PLEASE dO

NOT RETURN IT TO THE dEALER yOU BOUgHT IT FROM. PLEASE CONTACT THE CREEK COMPANy 

dIRECTLy TOLL FREE AT 1-800-843-8454. WE ARE OPEN M-F 9AM-5PM MOUNTAIN TIME. OR CONTACT US

VIA E-MAIL AT INFO@CREEKCOMPANy.COM.

HIN

IS LOCATEd ON SqUARE TUBINg OF SEAT SUPPORT FRAME MEMBER

ANd ON RIgHT MAIN FRAME MEMBER (SEE FIgURE 1)

Accessories are available for your ODC SUPERSPORT XR

.  Ask for them where you bought your ODC SUPERSPORT XR

,

or visit the Creek Company Store at www.CreekCompany.com

The Creek Company Ltd. ,  PO Box 773892,   Steamboat Springs, CO 80477

                          

email: info@CreekCompany.com  •   Made in China

Specifications and other details subject to change without notice.

All Creek Company products are guaranteed against defects in material and workmanship for the life of the product to 

the original owner.  This does not cover damage due to misuse or normal wear and tear.

TM

Reviews: