3
CHES 9 A1
GB
General Power Tool
Safety Warnings
WARNING!
►
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may
result in electric shock, fi re and/or
serious injury.
Save all warnings and instructions
for future reference.
The term “power tool” in the warnings
refers to your mains-operated (corded/
mains adapter) power tool or battery-
operated (cordless) power tool.
■
Do not expose power tools to rain
or wet conditions.
Water entering
a power tool will increase the risk of
electric shock.
■
Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts.
Damaged
or entangled cords increase the risk
of electric shock.
■
If operating a power tool in a
damp location is unavoidable, use
a residual current device (RCD)
protected supply.
Use of an RCD
reduces the risk of electric shock.
■
Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be con-
trolled with the switch is dangerous
and must be repaired.
General safety instructions for
the hot air blower
■
This appliance may be used by
children aged 8 years and above
and by persons with limited physi-
cal, sensory or mental capabilities
or lack of experience and knowl-
edge, provided that they are under
supervision or have been told how
to use the appliance safely and
are aware of the potential risks.
Children must not use the appliance
as a plaything. Cleaning and user
maintenance tasks may not be car-
ried out by children unless they are
supervised.
■
To avoid potential risks, if the ap-
pliance power cord is damaged it
must be replaced by the manufac-
turer, its customer service or by a
qualified technician.
■
Have your power tool serviced
by a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
■
Plugs and power cords should
only be replaced by the manu-
facturer of the power tool or the
manufacturer’s authorised custom-
er service agent.
This will ensure
that the safety of the power tool is
maintained.
Summary of Contents for CHES 9 A1
