D I A M A N T
Pro
7
Original instructions.
Intended use
The coffee machine has been
designed and manufactured to
make espresso coffee and other
hot drinks (e.g., steaming and
frothing milk). Do not use it for
any other purpose.
The machine is intended to be
used by trained personnel for
preparing foodstuffs.
This machine is not intended
for use in industrial kitchens,
domestic kitchens, or similar
locations.
The manufacturer will not
be held liable for damage to
persons or property due to
incorrect, improper or negligent
use by nonprofessional
personnel.
The A-weighted sound pressure
level is below 70 dB.
To ensure optimal performance,
install the machine in a location
where these parameters will
not be exceeded:
- Maximum inlet water
pressure: 0.9MPa (9 Bar),
or 1.0MPa (10 Bar) [only
for Norway, Sweden and
Denmark]
- Minimum inlet water pressure:
0.0MPa (0 Bar)
Note: For a suitable performance
of machine, water pressure
should be kept between 0.8-
0.9MPa. Install a pressure reducer
in case water pressure exceeds
this range.
- Maximum inlet water
temperature: 40ºC
- Ambient temperature
b10ºC (min.) and
+40ºC (max.).
GENERAL INFORMATION
Install the machine in a
horizontal position and
away from heat sources and
flammable objects.
This machine should only be
installed on a water-resistant
work surface that is capable
of adequately supporting the
machine’s weight.
Appliance is only to be installed
in locations where its use and
maintenance is restricted to
trained personnel. Access to
the service area is restricted
to persons having knowledge
and practical experience of
the appliance, in particular as
far as safety and hygiene are
concerned.
Keep all hazardous packaging
materials, such as plastic bags,
styrofoam, and staples, out of
reach of children.
Plug the machine into a
properly installed, earth
grounded electrical outlet with
line voltage that matches the
specifications for the machine.
Ensure that the power supply
voltage does not fluctuate by
more than 6%.
Position the power cable so
that users cannot trip over it.
Keep the power cable away
from sharp edges and heat
sources.
Warnings and Precautions
