12
13
Special functions
1.
2.
3.
Programming:
Place a cup under
the output
Load capsule: 1.
Push the operat-
ing lever right back.
2
. Drop cap-
sule straight into the opening.
3
.
Pull operating lever right forward
Programming the coffee quantity
Energy-saving mode
Energy-saving mode activated
:
Cleaning key
slowly flickers
light/dark (white)
Stop energy-saving mode:
Move
the operating lever or press any
key (keys ligth up in white)
3 sec.
Hold down
the key to be pro-
grammed, e.g.
(min. 3 sec-
onds) until it starts flashing rapidly. It
then flickers slowly (= heating up)
Coffee output starts. When your cup
is full enough
press the key again
– output stops and all keys light up
again
Output quantity on first start-up
(= factory setting):
Ristretto 30 ml (= «small» cup)
Espresso 50 ml (= «medium» cup)
Lungo/Tea 110 ml (= «large» cup)
Energy-saving mode
is automatically activated if no key is pressed for 60 seconds
(key
slowly flickers light/dark).
To shut it off permanently (e.g. during vacations), pull out the power plug.
Good to know