Creo CXP6000 Color Server User Manual Download

Page: 57 / 514

Setting PPD File Parameters

Image Noise

(default) applies no image noise to your job.

Noise 2-10

apply image noise. The higher the level, the smoother the

vignettes appear.

Color Mode

Grayscale

prints all pages using black (K) toner only.

Color

prints all pages using all CMYK toners.

If you selected

Color

, select the

Print grays in black toner

option in the

Gray RGB

list to print RGB gray images using black toner only. If you

want grayscale CMYK elements to be printed using black toner only, you
need to select

Perceptual

as the rendering intent.

RGB Workflow

This option changes gamma values, thus producing more color depth
for RGB images. To use the embedded CSA, select

Use Source CSA

. To

replace use a Spire or Adobe CSA, select

Use Spire RGB 1.8, Use Spire

RGB2.1

Use Spire RGB 2.4

Use sRGB

, or

Use

Adobe RGB

Gray RGB

Select

Print grays using CMYK

to print grayscale CMYK elements using

black toner only.
Select

Print grays in black toner

to print RGB gray images using black

toner only.

Rendering Intent
for RGB

Rendering intent defines how colors are compressed from CIELAB
values to printer color space.

Relative Colorimetric

provides an accurate general-purpose gamut

mapping for all applications. The lowest density is mapped to white.

Absolute Colorimetric

preserves the substrate tint.

Saturated (presentation)

produces saturated colors that are suitable for

office environment applications —for example, text documents and
presentations.

Perceptual (photographic)

yields the most effective results on

continuous tone and images.

Saturated (presentation)

and

Perceptual (photographic)

are the most

effective rendering intent methods for RGB images.

Table 4: PPD parameters

PPD Parameter

Printing Options

Summary of Contents for CXP6000 Color Server



































































































































































































































































































































































































































































































































Search results

Summary of Contents for CXP6000 Color Server

Reviews:

Related manuals for CXP6000 Color Server

Brands by name

Popular brands

Creo CXP6000 Color Server, User Manual

Search results

Summary of Contents for CXP6000 Color Server

Reviews:

Related manuals for CXP6000 Color Server

Brands by name

Popular brands