Crescent duo lightway, Instruction Manual

7. Attach the bumper bars

Push the ends of the bumper bars in to the 

slots on the chassis until they ’click’ in to pla-

ce. To remove the bars, push the buttons on 

both sides and pull the bars off.

8. Foot rest adjustment

Push the buttons on both sides of the leg rest 

and select desired position.

9. To operate the canopy

Pull the canopy forward by the front rim. For 

added shade/weatherprotection,the canopy 

can be unzipped further.

10. To operate the seat recline function

Squeeze the clasp on the back of the seat unit 

and pull downwards. When the backrest has 

reached the desired position, release. To raise 

the backrest, hold both straps with one hand 

and push the backrest up with your other.

11. To adjust and secure the harness

Push the buckle prongs in to the buckle 

housing until they click. Adjust sliders to fit for 

your child. After making adjustments to the 

seat always re adjust the harness. Release 

the harness by pressing the button on the 

buckle housing unit.

WARNING! Always use the crotch strap in 

combination with the waist belt.

WARNING! For children aged 0 - 6 months 

the harness must be fed through the retaining 

loops to prevent risk of strangulation. 

12. To fold the stroller

Make sure the seats are in the upright posi-

tion, the canopy is retracted and the brake 

are engaged. Slide the primary lock button 

(A) to the side and then squeeze the secon-

dary lock button(B). Keep the secondary lock 

button held in and push up  and forward on 

the handle. Fold until folding catch locks.

7. Adjusting the footrest

In order to adjust the footrest a push/pull 

technique must be applied. Push the footrest 

inwards to make it adjustable. When the de-

sired position is reached pull outwards until 

it locks into position.

8. Canopy locking

To lock the canopy in fully unfolded position, 

use your hand to drag it out to position. A 

click should be felt when the canopy is fully 

unfolded and locked in position. Someti-

mes a small force/handpress from above is 

needed to reach the locking position.

9. Swivel lock/release

To change the front wheels from fixated or 

swiveled function adjust the button left or 

right.

10. Handle height adjustment

There are multiple handle height positions. 

To  adjust,  press  the  centre  button  on  both 

sides and simultaneously and adjust to desi-

red level. Release button and engage at the 

desired height.

11. Using the brakes

To  apply  brake,  press  down  gently  on  the 

middle  of  the  brake  bar. To  release  brake, 

place foot under brake bar and pull upwards.

Warning always apply the brakes when the 

pushchair is stationary and placing or remo-

ving the child.

7

A

B

8

9

10

11

A

B

12

A

B

C

1

2