maintenance and care
safety warning
• Use the Comfort for only one child at a
time.
• Comfort with seat unit is suitable for child-
ren from 6 months to approx 3-4 years (up
to 15kg), and when seated, the midpoint of
the childs head is at or below the top of the
stroller seat.
• It is recommended that you do not use the
comfort seat unit until your child is able to sit
up unassisted, usually at around 6 months.
• Make sure the chassis is fully unfolded and
locked before placing your child in it.
• Keep your child away from all moving parts
when folding, unfolding or adjusting the
pushchair.
• Always apply brakes when parking, even
when standing still for a few moments.
• Inspect and clean your pushchair
frequently. Never use abrasive cleaners or
lubricants.
• Never lift the Comfort or use escalators or
stairs when there is a child in it.
• Use original accessories and manufactu-
rer-approved parts only.
Failure to do so may affect your warranty.
• Do not make any changes to this product. If
you have any problems or complaints, con-
tact your retailer or importer.
• To avoid the risk of suffocation, keep all
plastic packaging materials out of the reach
of children.
• Cleaning, washing and drying:
Clean your comfort and it’s accessories
with a fresh cloth and handwarm water
by hand. Do not wash in washing mach-
ine, or dry in dryer. If wet, please dry
the fabrics hanging, away from the sun.
All moving parts shall be cleaned regularily
and lubricated with silicone spray or similar.
The Crescent Comfort requires
regular maintenance by you.
• Regularly inspect the locking devices,
brakes, harness assembly, catches, seat
adjusters, joints and fixings to ensure
they are secure and in full working order.
• The brakes and wheels are subject to
wear and should be maintained frequently
and replaced when necessary.
• Should any parts of your Comfort
pushchair become stiff or difficult to
operate, ensure that dirt is not the
cause. Then try a light application of a
sprayable lubricant e.g. silicon spray,
ensuring that the lubricant penetrates
between the components, but take care
as excessive application may encourage
the accumulation of dirt. Regular light
lubrication of moving parts will extend
the life of your pushchair and make
opening and folding easier.
• Do not leave the Comfort pushchair
in sunlight for prolonged periods as the
colour of some fabrics may fade.
• Store the pushchair in a dry, well
ventilated and safe place.
• Your pushchair should be serviced and
reconditioned before using it for a
second baby, or within 18 months,
whichever is the sooner. This can be
arranged by contacting your Crescent
dealer.
The correct use and maintenance of this
stroller is essential.
• Do not use excessive force when folding the
stroller. If you are having problems, fully open
the stroller and repeat the folding procedure.
• Always let wheels down as gently as pos-
sible when mounting and dismounting kerbs.
• Always fold the stroller when going up or
down stairs. Never bump the buggy over
these or similar obstacles.
• In some climates mould and mildew can
affect the fabric and rain cover. To avoid this,
do not fold the stroller when it is wet. Leave it
open in a ventil ated area until completely dry.
• Always store the stroller in a dry place.
• When storing the stroller in the car, never
place other items on top of it.
• Do not exceed the maximum load of 2 kgs in
the shopping basket. (Where provided).
Cleaning
• Fabric covers and trims may be spot washed
using mild detergent and warm water. Leave
to dry in aventilated area away from direct
sunlight
• Avoid leaving your buggy in direct sunlight
for prolonged periods of time as this may
cause fabric to fade.
• Do not dry clean, machine wash or tumble
dry. Metal parts may be cleaned with a damp
cloth. Always wipe dry. Clean plastic parts with
a mild soap and water solution, wipe dry.
Maintenance
Maintain your stroller by lubricating all metal
moving parts with a light machine oil e.g.
WD-40.
Do not use heavy machine oil or grease as
this can attract dirt or grit.
Check that nothing is loose or broken and
that no sharp edges have been exposed.
Inspect all joints and the harness, replace
any damaged parts immediately.
Inspect any nuts and bolts regularly to ensure
none have worked loose. Tighten as ne-
cessary. Only use replacement parts and
accessories that have been approved by the
manufacturer. Failure to do this may invalida-
te your warranty.
Summary of Contents for duo lightway
Page 16: ...crescentbarnvagnar se ...