ATTENTION! Do not use the machine before you have read and understood the Instructions for use manual
The machine
doesn’t work
as it should?
The suction
doesn’t work
as it should?
The machine
doesn’t clean
as it should?
The brushes
don’t work as
they should?
SC351
www.crescentindustrial.co.uk
1 Check if the fuse has triggered.
2 Check if there are external materials
avoiding brush rotating.
1 Check if the power cable is correctly
connected.
2 Check if the battery is charged.
3 Check if the fuse isn’t burnt out.
4 Check if the programs selector is
damaged or has the right function
selected.
1 Check if the suction hose is
correctly installed and cleaned.
2 Open the recovery tank and check
if the vacuum grid and gasket are
cleaned.
3 Check if squeegee blades are dam-
aged or dirty.
4 Check if the fuse isn’t burnt out.
1 Check if the programs selector has
the right function selected.
2 Check if the solution valve is dirty/
clogged.
3 Check if the solution reduction
fitting is dirty/clogged.
4 Check brush/pad condition
