Output Specifications
* 0 dBu=0.775V (RSM)
Nom./Min.
Output Level dBu*
Output
Load
Balance/
Connector
Impedance
Nom. Max.
Unbalanced
(Ohms)
1/4" TS:
2 k
0
+22
Unbalanced
Tip (+)
Master L/R
Sleeve-Ground
XLR:
2 k/600
+4
+26/+24
Balanced
Pin 1 Ground
Pin 2 (+)
Pin 3 (-)
XLR:
2 k/600
+4
+26/+24
Balanced
Pin 1 Ground
Mono
Pin 2 (+)
Pin 3 (-)
Unbalanced
1/4" TS:
Group 1 — 6
2 k
0
+22
Tip (+)
Mix
Sleeve Ground
1/4" TS:
2 k
0
+22
Unbalanced
Tip (+)
Aux 1-2 —
Sleeve-Ground
XLR:
2 k/600
+4
+26/+24
Balanced
Pin 1 Ground
Pin 2 (+)
Pin 3 (-)
1/4" TS:
Aux 3 — 6
2 k
0
+22 Unbalanced
Tip (+)
Sleeve Ground
1/4" TS:
Control Room
10 k
0
+22
Unbalanced
Tip (+)
Sleeve Ground
1/4" TRS:
Headphones
8
-14
-8
Unbalanced
Tip - Left
(+22 -No load)
Ring - Right
Sleeve Ground
26
Gain:
Mic Input to Channel Insert Send:
Va10 dB to +50 dB
Mic Input to Channel Direct Output (Ch. 1 to 8)
Va20 dB to +60 dB
Mic Input to Group 1 to 4 or L/R out
70 dB
Mic Input to Master L/R through Group 1 to 4
80 dB
Frequency Response:
Mic Input to L/R Master
20 Hz to 20 kHz (+0, -1 dB) @ Max. Gain
20 Hz to 20 kHz (±0.5 dB) @ Min. Gain
Phase Response:
Mic Input to L/R Master
±30 deg. (20 Hz to 20 kHz)
Total Harmonic Distortion (THD):
0.01%: 20 Hz ~ 20 kHz, Mic Input to L/R Master outs @ nominal level (22 Hz to 80 kHz BW)
0.005%: 1 kHz, Mic Input to L/R Master outs @ nominal level (22 Hz to 22 kHz BW)
Hum and Noise
EIN
-128 dBu
(Terminated 150 Ohms)
Summary of Contents for CPM 2462
