Any locomotive that you link in the transmitter have to be added to your track.
Press the right or left arrow, to choose the cab number you want to run the MU locomotives.
Scroll down to [MU MODE: OFF] and press the right arrow to turn ON the MU mode
settings.
MU1 comes with a default link address which is number [49].
To enter the link address [00] quickly press the STOP/ENTER button
Press the right or left arrow to select the loco you want to run [MU].
Scroll down to (MU2-MU3-MU4-MU5 MU6) and select locomotives you want to run [MU].
If you enter a locomotive that you do not want to run MU, press the Stop/Enter button and it
will show NOT SELECTED .
‘
’
STEP O:
Press the MENU button twice to back to the main screen.
On the main screen you will see the locomotives that you [MU]. Only one locomotive will
show up on the main screen that you MUed.
17.
VIEW INDIVIDUAL
MU LOCOMOTIVE
To view MU
locomotives press the bottom
left key on the
transmitter [
*
⇑ ]
.
You can view the MU
locomotive and control the aux
functions.
When you selected a
locomotive that you want to
control and adjust its functions press the MENU button once.
Select 1. ASSIGN FUNCTIONS and press number [1] key on the transmitter to adjust the
functions as necessary, aux functions and step speed.
For more info about auxiliary functions go to page 26
View MU locomotives
2.4 TRAIN ENGINEER
INSTRUCTION MANUAL
NS
Page
20
of
39
MAIN SET UP
1. ASSIGN
FUNCTIONS
â
2. USAGE OF CAB
3. ADD MU/SU CAB
4. COPY LOCO
5 SYSTEM
ADD MU/SU CAB
CAB NO: CAB-0
â
MU MODE: OFF
SU [49] L49
Ylll
MU-GP-40 RD: 1802
CAB-0 DL
1.0s
á
100%
â
0
%
¡
DIR
SPEED 0 .
0
ADD MU/SU CAB
CAB NO: CAB-0
â
MU MODE: ON
MU1 [49] L49
MU2 NOT SELECTED
MU5 NOT SELECTED
