17
definition in those regions. Use of these Bass Boost Presets will add the bass content to the music
that needs it, but without risking damage or premature limiting of the Subs or the system as a whole.
Trying to add boost in the bass externally to the system will not be as effective or allow for as much
additional headroom in terms of maximum peak SPL.
In order to load Presets for Bass Boost system EQ use, you will need to access the Factory files
stored in the Versarray™ Pro series User GUI PC software folders for Presets.
Loading Presets from PC GUI software folders
1. Position the View page from Fig. 6 so it does not cover up the row of icons at the top left corner of
the Start page, but still has the bottom portions of the View page visible.
In the File Management group A, select “Load”, as seen in the upper left-hand corner of Fig. 7 below.
Fig. 7
2. A typical Windows file manager window will come up with the File Folder contents for the Preset
files, generally located at:
For Windows 7 and for Windows XP - C:\Program Files (x86)\VR Series v1.2.X\Preset
For Windows 10 - C:\Program Files\VR Series v1.2.X\Preset. No (x86)
where C: is the root drive where the VR112 PC GUI software has been located, and “X” is the version
of the VR112 PC GUI software you have loaded onto the PC.
We will chose the
VR218_BassBoost
Preset file to be loaded into the power amp DSP Preamp.
Highlight and Click “OPEN” on the
VR218_BassBoost
Preset file.
The bar across the top of the View window should now display the “Program Loaded” as the
“
VR218_BassBoost” Preset. During normal operation after being fully informed of the rest of the
