39
6. Double-click on the desired unit in the NAME column in that row, shown by the “X” in
Fig. 5, and the View page will come up as shown in Fig. 6.
CAUTION:
After loading a Project into an array of VR PRO models, look at the View page, and the
other pages for that cabinet/device, to make sure that the desired parameters have loaded in, and
that crossovers, and EQ are present. This will require paging through the Input page, and the Output
page to make sure that the curves shown are not all flat with no crossover action or EQ present.
IF THE VR218 IS OPERATED WITHOUT ANY CROSSOVERS ACTIVE, OR WITHOUT ANY
LIMITERS ENGAGED, IT IS POSSIBLE THAT THE WOOFERS COULD BE DAMAGED,
so it is
important to check the individual pages of each device/cabinet to make sure all the parameters have
loaded in properly.
F4
Add Group
Contact Crest Audio® for details on this function, or check the Crest Audio® website for more
information:
https://peaveycommercialaudio.com/versarray
M1
Store Program
Allows multiple cabinets to have a Preset File stored to memory, see Fig. 20
Fig. 20
All the cabinets currently connected online to the Versarray™ Pro series User GUI Software network
are shown grayed in, other cabinets that may have been connected at one time are listed with white
letters. The IP address for a particular cabinet can be determined by looking at the Device List of Fig.
2, which also lists the assigned Net ID number, as well as the Name of the device and the Unique ID
number.
Once the online devices have been check box selected for “Store to device(s)”, the network IP
addresses turn orange. Choose a Name for the file to be loaded, make a “Select position” choice for
