PART 3
•
Unscrew the plastic mounting nut from the front of the motor shaft by rotating it anti
clockwise.
•
Position the rear guard against the front of the motor shaft, ensuring the locating pegs
on the motor shaft are engaged correctly in the holes of the rear guard.
•
Tighten the rear guard Mounting Nut clockwise. DO NOT OVERTIGHTEN IT.
•
Push the fan blades onto the motor shaft.
•
Tighten the blade cap or nut by turning it anti clockwise.
•
Mount the guard grip of the front guard onto the rear guard to ensure them to be
fixed together tightly. Insert the screw into the holes in the rims of the guard, ensuring
the front guard and rear guard can be reinforced by the screw.
