12 • DSP-1282 & DSP-1283: SIP Endpoint with ShoreTel Connect
Configuration Guide — 8337B
Add Trunk Group
To add a trunk group:
1. Click Trunks > Trunk Groups > Trunk Groups.
ShoreTel Connect Director: Add Trunk Group
2. Click the GENERAL tab.
3. Enter PSTN Trunk for Crestron for the Name (for this example).
4. Select SIP for the Trunk type.
5. Select Crestron_ITSP for the Profile (created in a previous section).
6. Click SAVE.
7. Click the INBOUND tab.
ShoreTel Connect Director: Add Trunk Group - INBOUND
8. Enter 10 for the Number of digits from CO (for this example).
9. Check DNS.
10. Check DID.
11. Click the OUTBOUND tab.
