Internet Radio Tuner Card
Crestron
ATC-AUDIONET
Installer Tools Menu
Installer Tools
System Information
Video Information
Slot 1 ATC-AUDIONET
SOURCE
ROOM
HOUSE
MENU
SURRND
THEATER
DISPLAY
MORE
2.
Turn the selection knob to highlight the slot containing the
ATC-AUDIONET (slot 1 in the previous diagram) and press the
ENTER
button. A list of parameters that can be viewed or changed are displayed.
“ATC-AUDIONET” Controls
S1 ATC-AUDIONET
IP Address
Subnet Mask
Default Router
SOURCE
ROOM
HOUSE
MENU
SURRND
THEATER
DISPLAY
MORE
IP Address
The ATC-AUDIONET uses TCP/IP communications for communications between a
control system and a PC. The IP address can be manually set or obtained from a
DHCP server. For information on enabling DHCP to obtain an IP address, refer to
“Enable/Disable DHCP” on page 28. To manually set an IP address:
1.
Turn the selection
knob to highlight
IP Address
and press the
ENTER
button. If DHCP is enabled, the IP address is displayed. Otherwise, the IP
Address controls are displayed.
“Edit IP Address” Controls
Edit IP Address
Use Softbutton to select.
The use Knob to edit.
Press ENTER to accept.
[175]
036.
020.
SOURCE
ROOM
HOUSE
MENU
SURRND
THEATER
DISPLAY
MORE
025
2.
Turn the selection knob to set the first octet of the IP address.
3.
Press the soft button under the next octet (or press the
ENTER
button to
move to the next octet) to select it for editing.
4.
Repeat steps 2 and 3 for each octet.
5.
To save the IP address, move the cursor to the right-most octet and press the
ENTER
button. To cancel the operation and return to the previous screen,
press
MENU
.
26
•
Internet Radio Tuner Card: ATC-AUDIONET
Operations & Installation Guide – DOC. 6933A