Crestron
C2N-CAMIDSPT
Camera Interface, Digital Servo Pan Tilt Head
Operations Guide - DOC. 6262A
Camera Interface, Digital Servo Pan Tilt Head: C2N-CAMIDSPT
•
23
C2N-CAMIDSPT General Controls Input and Output Signals
CAMIDSPT General Controls Input and Output Signal Descriptions
SIGNAL TYPE
AND NAME
DESCRIPTION
Digital Input: <
Set
Preset
>
Set an internal preset 1-100 in the pan/tilt. Preset number is
determined by analog input join. Rising edge triggered. Presets
are available for motorized lenses with potentiometer feedback
and servo lenses in position mode.
Digital Input: <
Recall
Preset
>
Recall an internal preset 1-100 from the pan/tilt. Preset number
determined by same analog input join as above. Rising edge
triggered. Presets are available for motorized lenses with
potentiometer feedback and servo lenses in position mode.
Digital output:
<
Moving
>
Indicates any ongoing movement of the pan/tilt axes or lens.
Remains high for as long as movement continues.
High/1 = Moving; Low/0 = No movement
Digital output:
<
PresetInPos
>
Indicates that any recalled preset (internal or controller-defined) is
in the preset position.
High/1 = Preset in position;
Low/0 = Preset has been moved off position.
(continued on next page)
