Crestron C2N-CAMIDSPT, Operation Manual

Camera Interface, Digital Servo Pan Tilt Head  

Crestron 

C2N-CAMIDSPT

20  

•

  Camera Interface, Digital Servo Pan Tilt Head: C2N-CAMIDSPT 

Operations Guide - DOC. 6262A 

NOTE:

  During calibration, the unit will not respond to Cresnet control. The local 

joystick should not be operated during the calibration process. 

Programming Software 

Have a question or comment about Crestron software? 

Answers to frequently asked questions (FAQs) can be viewed in the Online Help 
section of the Crestron website. To post a question or view questions you have 
submitted to Crestron’s True Blue Support, log in at 

http://support.crestron.com/

. 

First-time users will need to establish a user account.

Earliest Version Software Requirements for the PC 

NOTE:

 Crestron recommends that you use the latest software to take advantage of 

the most recently released features. The latest software is available from the 
Downloads | Software Updates section of the Crestron website (www.crestron.com). 

The following are recommended software version requirements for the PC: 

• 

SIMPL Windows version 2.05.22 or later, with Library Update 296. 
Requires SIMPL+ Cross Compiler version 1.1. 

• 

Crestron Database version 16.1.0 or later. Required by SIMPL Windows. 

Programming with SIMPL Windows 

NOTE

: The following are acceptable file extensions for programs that include a 

CAMIDSPT, developed for specific control system types: 
 .smw 

projectname

.smw (source file) 

 .spz 

projectname

.spz (compiled file for 2-series) 

 .usp 

projectname

.usp (source code module for SIMPL+) 

SIMPL Windows is Crestron's software for programming Crestron control systems. 
It provides a well-designed graphical environment with a number of workspaces 
(i.e., windows) in which a programmer can select, configure, program, test, and 
monitor a Crestron control system. SIMPL Windows offers drag and drop 
functionality in a familiar Windows

®

 environment.  

NOTE:

  The following descriptions assume that the reader has knowledge of 

SIMPL Windows. If not, refer to the extensive help information provided with the 
software. 

NOTE

: In the following description, the PRO2 control system is used.  

This section describes a sample SIMPL Windows program that includes a 
CAMIDSPT. 

Configuration Manager is where programmers “build” a Crestron control system by 
selecting hardware from the 

Device Library

. In Configuration Manager, drag the 

PRO2 from the Control Systems

folder of the 

Device Library

 and drop it in the