Crestron
CAT5 Wiring
Reference
Guide
Balanced Composite Video from CNX-PVID to
TPS-IMC-BV
Using a standard EIA-568B CAT5 cable, program the composite video to output
from level 2 of the CNX-PVID. Set the switch labeled Bal/Coax to
Bal
on the
TPS-IMC-BV.
NOTE:
Connection shown below is for Level 1 Output from CNX-PVID.
Balanced Composite Video from CNX-PVID RJ-45 Connector (ROOMS 1 – 8) to
TPS-IMC-BV RJ-45 Connector (BALANCED VIDEO)
FROM
PIN #
CNX-PVID
(ROOMS 1 - 8)
RJ-45 CONNECTOR
TO
PIN #
TPS-IMC-BV
(BALANCED VIDEO)
RJ-45 CONNECTOR
1
Chrom Input
2
Chrominance - Input
1
Level 1 +
3
Lum Input
4
Not Connected
5 Not
Connected
2
Level 1 -
6
Luminance - Input
7 Not
Connected
8
Not Connected
1 2 3 4 5 6 7 8
Pin 1
Pin 1
1 2 3 4 5 6 7 8
Reference Guide – DOC. 6137A
Crestron CAT5 Wiring
•
27
