Reference Guide
Crestron
CAT5 Wiring
Balanced Audio Connections from TPS-IMC-BV to
CNX-BIPAD8 (Mic and Audio)
Mic and Audio from TPS-IMC-BV RJ-45 Connector (AUDIO INPUT) to CNX-BIPAD8
RJ-45 Connector (ROOMS 1 – 8)
FROM
PIN #
TPS-IMC-BV
(AUDIO INPUT)
RJ-45
CONNECTOR
TO
PIN #
CNX-BIPAD8
(ROOMS 1 - 8)
RJ-45 CONNECTOR
1
Mic Out +
1
Audio In L + for the mic to operate
2
Mic Out -
2
Audio In L - for the mic to operate
3
Mic Out +
3
Audio In R + for the mic to operate
4
Audio Left In +
4
Audio Left out +
5
Audio Left In -
5
Audio Left out -
6
Mic Out -
6
Audio In R - for the mic to operate
7
Audio In Right +
7
Audio Out Right +
8
Audio In Right -
8
Audio Out Right -
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Pin 1
Pin 1
Connect the TPS-IMC-BV to the CNX-BIPAD8 using the Crestron TPS Audio
cable. Audio on both channels will work properly when connecting the TPS panel
and the TPS-IMC-BV and using a standard EIA 568B CAT5 cable between
CNX-BIPAD8 and TPS-IMC-BV.
When connecting the CNX-BIPAD8 direct to the TPS touchpanel (not using the
TPS-IMC-BV) using a standard CAT5 cable or Crestron TPS Audio cable, only the
audio on the right channel will operate.
12
•
Crestron CAT5 Wiring
Reference Guide - DOC. 6137A