Reference Guide
Crestron
CAT5 Wiring
Balanced Composite Video from CNX-PVID to
TPS-2000L
To connect the TPS-2000L to the CNX-PVID, any level from the CNX-PVID will
work. Connect pin 7 of the TPS-2000L to any positive level on the CNX-PVID.
Connect pin 8 of the TPS-2000L to the negative level on CNX-PVID. The following
example shows level 1.
Balanced Composite Video Connections from TPS-2000L Mini Connector to CNX-PVID
RJ-45 Connector (ROOMS 1 – 8)
FROM PIN #
CNX-PVID
(ROOMS 1 - 8)
RJ-45
CONNECTOR
TO
PIN #
TPS-2000L
MINI CONNECTOR
Not Connected
Not Connected
1
Audio In +
Not Connected
Not Connected
2
Audio In -
Not Connected
Not Connected
3
Ground/Shield
Not Connected
Not Connected
4
Mic Out +
Not Connected
Not Connected
5
Mic Out -
Not Connected
Not Connected
6
Ground/Shield
1
Level 1 positive
7
Video In +
2
Level 1 Negative
8
Video In -
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
Pin 1
26
•
Crestron CAT5 Wiring
Reference Guide - DOC. 6137A
