Crestron
CEN-NVS100
Network Video Streamer
Using the Crestron ToolBox
NOTE:
To be able to use the Crestron Toolbox to access the CEN-NVS100, the
UPnP (Universal Plug and Play) Ethernet protocol configuration setting of the
CEN-NVS100 must be enabled. The UPnP protocol is enabled by default. For
additional information, refer to “Configuring Network Settings” on page 27.
To access the CEN-NVS100 from the Crestron Toolbox:
1. Open the Crestron Toolbox.
2. From
the
Tools
menu, select
Device Discovery Tool.
NOTE:
You can also access the Device Discovery Tool by clicking the
Device Discovery Tool button (
) in the toolbar.
NOTE:
The security software running on your computer may send you a
program alert regarding the attempt of Crestron Toolbox to connect to the
network. You must allow the connection so that the Device Discovery tool
can be used.
3. From the device list on the left-hand side of the screen, select the
UPnP name of the CEN-NVS100. The default UPnP name is
CEN-NVS100
.
The user name and password window opens, allowing you to log in to the
CEN-NVS100. For log-in information, refer to “Logging In to the
CEN-NVS100” below.
Logging In to the CEN-NVS100
The user name and password window allows you to log in to the CEN-NVS100.
“User Name and Password” Window
Operations & Installation Guide – DOC. 6873A
Network Video Streamer: CEN-NVS100
•
11