Crestron
CEN-NVS100
Network Video Streamer
Configuring the Network Type
Configure the network type in the
Network Type
pane of the “Network”
configuration page.
“Network” Configuration Page – Network Type
1. Select the network type by clicking the
LAN
or
PPPoE
radio button.
NOTE:
Select
PPPoE
to connect to ADSL networks.
To configure LAN parameters, proceed to step 2. To configure PPPoE
parameters, skip step 2 and continue with step 3.
2. If LAN was selected in step 1, configure LAN parameters:
a. Click either of the following radio buttons:
•
Enable DHCP:
(Default setting) Allows an IP address to
be obtained automatically from a DHCP server. You can
find the address of the server using the Device Discovery
tool of Crestron Toolbox.
•
Use Static IP Address:
(Recommended setting) Provides
the benefit of a fixed IP address and related information
that you enter manually:
IP
Address:
Enter a unique IP address for the
CEN-NVS100. If the device is on a network with a DHCP
server, ensure that the IP address is not in the range of IP
addresses that the DHCP server will be assigning. In a
typical installation, the last number will start at 100 and
will increment.
Operations & Installation Guide – DOC. 6873A
Network Video Streamer: CEN-NVS100
•
29