Network Video Streamer
Crestron
CEN-NVS100
Subnet Mask:
Enter the subnet mask that is set on your
network.
NOTE:
A class C network allows up to 255 devices to
communicate without a router and has a subnet mask of
255.255.255.0. A class B network allows up to 65,535
devices to communicate without a router and has a subnet
mask of 255.255.0.0.
Default router:
Enter the IP address of your network’s
device (usually a router) that enables communication
between your network and the Internet.
Primary DNS:
Enter the address of the primary domain
name server, which translates host names into IP
addresses.
Secondary DNS:
Enter the address of the backup domain
name server.
b. Enter WINS server addresses:
Primary WINS Server:
Enter the address of the server that
maintains the database of computer name and IP address.
Secondary WINS Server:
Enter the address of the backup server
that maintains the database of computer name and IP address.
Enable UPnP Presentation:
Select the checkbox to enable access
of the CEN-NVS100 from the Device Discovery Tool of Crestron
Toolbox.
Enable UPnP Port Forwarding:
Select the checkbox to enable the
CEN-NVS100 to automatically configure your router (if supported
by the router) to allow the video stream to be accessed remotely.
3. If PPPoE was selected in step 1, configure PPPoE parameters:
User Name:
Enter the user name that you received from your ISP.
Password:
Enter the password that you received from your ISP.
Confirm Password:
Reenter the password to confirm the password.
4. Click
Save.
NOTE:
Clicking
Save
to save changes to the “Network” configuration
page restarts the system to validate the changes.
30
•
Network Video Streamer: CEN-NVS100
Operations & Installation Guide – DOC. 6873A