Crestron
CEN-NVS100
Network Video Streamer
Configuring HTTP Settings
Configure HTTP settings in the
HTTP
pane of the “Network” configuration page.
“Network” Configuration Page – HTTP
Refer to the following HTTP configuration guidelines.
Authentication:
From the drop-down list, select either of the following
authentication mechanisms:
•
Basic:
(Recommended setting) Authenticates a user based on user name
and password. The password is not encrypted; therefore, basic
authentication is not secure.
•
Digest:
Authenticates a user based on user name and password.
The password is encrypted.
NOTE:
Although
Digest
authentication is a more secure authentication
mechanism than
Basic
authentication,
Digest
authentication is not
currently supported by all Web clients.
HTTP Port:
Enter the HTTP port number. The default port number is 80.
NOTE:
If you do not use the default number of 80, you must append the port
number to the IP address of the CEN-NVS100 to be able to access the CEN-NVS100
from your Web browser. For example, if you set the HTTP port number to 8888, you
must enter
instead of http://192.168.0.100.
Secondary HTTP Port:
Enter the secondary HTTP port number to allow the
configuration of an alternate port to access the HTTP server.
Access Name for Stream 1:
Enter the name to be used by the Crestron MJPEG
Viewer application. For example, when using
video.mjpg
(default setting), the
HTTP command to be entered into the Crestron MJPEG Viewer is the following:
/video.mjpg?user=
myuser
&pw=
secretpassword
video.mjpg is the default access name.
myuser
is the user created for view access.
secretpassword
is the password for this user.
Operations & Installation Guide – DOC. 6873A
Network Video Streamer: CEN-NVS100
•
31