background image

Crestron 

CEN-NVS100

 

 

Network Video Streamer

 

 

Configuring Privacy Mask 
Settings 

Configure privacy mask settings by pressing the 

Privacy Mask

 button in the “Video 

Settings” pane of the “Audio and Video” configuration page. The “Privacy Mask” 
configuration page opens. 

“Privacy Mask” Configuration Page 

 

NOTE:  

The “Privacy Mask” configuration page can also be accessed by entering 

the following URL address in your Web browser: 
 
 http://

Video Streamer

/setup/privacy.html 

 

Video Streamer

 is the host name or IP address of the CEN-NVS100. 

1. Select 

the 

Enable privacy mask

 checkbox to enable privacy mask 

window(s). A privacy mask window blocks viewing of an area on the video 
output as determined by the privacy mask window settings. 

NOTE:  

Up to five privacy mask windows can be created. 

2. Click 

New.

  A privacy mask window opens: 

• 

To adjust the size of the window, drag the top, bottom, left, and 
right edges of the window frame as desired. The 

X, Y, Width,

 and 

Height

 values automatically change as appropriate. 

• 

To move the window to block video in a desired location, click the 
title bar and drag the window to the desired location. The 

X

 and 

Y

 

values automatically change as appropriate. 

• 

To delete the window, click 

X

 in the upper right-hand corner of the 

window. 

3. In 

the 

Window Name

 text entry box, enter a name for the privacy mask 

window. The name is displayed in the title bar of the window. 

4. Click 

Save

 to save the changes. The privacy mask appears in the video 

window as shown below. 

Operations & Installation Guide – DOC. 6873A 

Network Video Streamer: CEN-NVS100  

  41 

Summary of Contents for CEN-NVS100













































































Reviews: