Crestron
CEN-NVS100
Network Video Streamer
NOTE:
The string of characters must conform to that of the external FTP
server. Some FTP servers cannot accept a preceding slash symbol before
the path without virtual path mapping. Refer to the FTP server
documentation for details.
NOTE:
The folder privilege must be open for upload.
Passive Mode:
Select the checkbox to enable
Passive
mode transmission.
Passive
mode allows the flow of data to be set up and initiated by the
CEN-NVS100 (FTP client) rather than by the FTP server.
HTTP
configuration:
URL:
Enter the URL to upload the media.
User Name:
Enter the granted user name on the external HTTP server.
Password:
Enter the granted password on the external HTTP server.
Network storage
configuration:
Network Storage Location:
Enter the path to upload the media.
NOTE:
Only one network storage is supported.
Workgroup:
Enter the workgroup for network storage.
User Name:
Enter the granted user name on the network storage.
Password:
Enter the granted password on the network storage.
Crestron Control System
configuration:
Server Address:
Enter the domain name or IP address of the Crestron
control system.
Server Port:
Enter the port number of the CEN-NVS100 module.
5. Click
Test
to test whether the settings are correct. A window opens displaying
the test result.
6. Close the window displaying the test result.
7. If the settings are correct, click
Save;
otherwise, enter the correct information,
test it, and then click
Save.
The server name, type, and address/location are shown in the
Server Settings
pane on the “Events and Servers” configuration page. In the sample screen
below, one server named
Server1
was added.
“Events and Servers” Configuration Page – Sample Server Settings Pane
To delete a server listed in the
Server Settings
pane, select the server in the drop-
down list and click
Delete.
Operations & Installation Guide – DOC. 6873A
Network Video Streamer: CEN-NVS100
•
55