Uninterruptible Power Supply
Crestron
CEN-UPS1250
Connectors, Controls & Indicators (Continued)
# CONNECTORS,
CONTROLS &
INDICATORS
DESCRIPTION
13 FILTERING
LED (1 green) Indicates the EMI and RFI noise
reduction circuit is active
14
Outlet Banks
BANK 1 – DIGITAL DEVICES
(6) NEMA 5-15R female;
Grounded AC power outlets, switched;
Includes noise filtering and protection for
digital devices such as control systems,
power supplies, touch screens and media
servers
BANK 2 – DISPLAYS
(2) NEMA 5-15R female;
Grounded AC power outlets, switched;
Includes noise filtering and protection for
display devices such as LCDs, plasmas and
projectors
BANK 3 – ANALOG DEVICES
(2) NEMA 5-15R female;
Grounded AC power outlets, delay switched;
Delayed turn on, adjustable from 0 to 10
seconds;
Includes noise filtering and protection for
analog devices such as Adagio
®
control
systems and tuners
BANK 4 – HI-CURRENT DEVICES
(2) NEMA 5-15R female;
Grounded AC power outlets, delay switched;
Delayed turn on, adjustable from 0 to 10
seconds;
Includes noise filtering and protection for
high current devices such as amplifiers
15 EXTERNAL
BATTERY (1) Connector for optional external battery,
sold by APC
2
16
CABLE
IN
OUT
IN
– (1) F-type coaxial, female;
Coaxial cable or antenna source connection
OUT
– (1) F-type coaxial, female;
Protected TV/receiver or modem device
connection
17
SATELLITE
IN
OUT
IN
– (1) F-type coaxial, female;
Coaxial cable or antenna source connection.
OUT
– (1) F-type coaxial, female;
Protected TV/receiver or modem device
connection
18
CIRCUIT BREAKER
Button
Disrupts power to all outputs in case of an
overload condition, press to reset
19
G
(1) Binding post, chassis ground lug
20
SERVICE PORT
3
(1) USB Type B female;
Used for factory configuration only
(Use
COMPUTER
port for communication
with Crestron Toolbox™)
(Continued on following page)
8
•
Uninterruptible Power Supply: CEN-UPS1250
Operations & Installation Guide – DOC. 6635E