Uninterruptible Power Supply
Crestron
CEN-UPS1250
Hardware Connections for the CEN-UPS1250
INPUT 120 V
47-63 Hz 12A:
Main Power
Input
Ground
ENV PROBE :
From External
Temperature /
RH Sensor
CABLE IN:
From Cable
or Antenna
COMPUTER:
To PC
SATELLITE IN:
From Cable
or Antenna
CABLE OUT:
To TV/Receiver
or Modem
TELCO OUT:
To Telephone
or Modem
TELCO IN:
From
Telephone Line
EXTERNAL BATTERY:
For Optional Battery
Sold By APC
SERVICE PORT:
For Factory
Configuration Only
BANK 1
DIGITAL DEVICES:
To Control Systems,
Power Supplies ,
Touchpanels and
Media Servers
SATELLITE OUT:
To TV/Receiver
or Modem
LAN:
10/100 BASE-T
Ethernet to LAN
BANK 2
DISPLAYS:
To LCD Displays,
Plasma Displays
and Projectors
BANK 3
ANALOG DEVICES:
To Adagio Control
Systems and Tuners
BANK 4
HI-CURRENT
DEVICES:
To Amplifiers
NOTE:
The
SERVICE PORT
is for factory use only. To prevent accidental use, it
comes with a plug installed.
Ground Wire Connections
Proper grounding is required. Connect the ground from the CEN-UPS1250 to earth
ground. (Refer to the grounding diagram in the front of this manual.)
16
•
Uninterruptible Power Supply: CEN-UPS1250
Operations & Installation Guide – DOC. 6635E