Uninterruptible Power Supply
Crestron
CEN-UPS1250
The following six screens display information about the CEN-UPS1250, including
firmware version and serial number, IP address, subnet mask, default router, control
system IP address and CIP status and ID.
Firmware Version Screen
CEN-UPS1250
1.000.0001,#AABBCCDD
“IP ADDRESS” Screen
IP ADDRESS
123.456.789.000
“SUBNET MASK” Screen
SUBNET MASK
255.255.255.000
“DEFAULT ROUTER” Screen
DEFAULT ROUTER
123.456.789.000
“CTRLSYS IP ADDRESS” Screen
CTRLSYS IP ADDRESS
123.456.789.000
“CIP STATUS; CIP_ID” Screen
CIP STATUS:ONLINE
CIP_ID:04 PORT:41794
Setup Screens
Use the front panel
SETUP
and up/down arrow buttons to configure (turn on or off)
various functions provided by each CEN-UPS1250 unit. When the
SETUP
button is
pressed, the unit functions are displayed in the following order:
1. Audible
Alarm
2. Sensitivity
3. Display
Dimmer
4. LED
Dimmer
5. Go To Battery If <XX Volts
6. Go To Battery If >XX Volts
7. Outlet
Delay1
8. Outlet
Delay2
9. Low Battery Warning
10. Battery Replacement Date
26
•
Uninterruptible Power Supply: CEN-UPS1250
Operations & Installation Guide – DOC. 6635E