Crestron
CNRFHT-15A/30A
Hand-Held Wireless Transmitters
PRO2 System View
The
System Views
lower pane displays the PRO2 system tree. This tree can be
expanded to display and configure the communications ports.
Expanded PRO2 System Tree
C2Net-Device Slot in Configuration Manager
A gateway device is required to incorporate a wireless RF transmitter into a Cresnet
system. Once a gateway is configured in a C2Net-Device Slot, the slot allows
Cresnet communication between the transmitter and the control system.
In Configuration Manager, drag the CNRFGWA gateway from the Wireless
Receivers (RF) folder of the
Device Library.
The
System Views
upper pane displays
the CNRFGWA device icon below the PRO2 graphic. The PRO2 system tree
displays the CNRFGWA gateway in Slot 9, with a default NET ID of 24.
NOTE:
An ST-CP control processor is automatically configured with a CNRFGWA
in its STCP-Net Device Slot 3, with a fixed NET ID of 2, when the ST-CP is dragged
into the upper pane of
System Views
. This NET ID cannot be changed.
Double-click the CNRFGWA icon in the upper pane to open the “Device Settings”
window. This window displays CNRFGWA device information. Select the Net ID
tab to change the gateway Net ID, as shown in the following figure.
“Device Settings” Window for the CNRFGWA
Operations Guide – DOC. 8092A
Hand-Held Wireless Transmitter: CNRFHT-15A/30A
•
9
