Hand-Held Wireless Transmitters
Crestron
CNRFHT-15A/30A
Custom Button Panel Engraving
The following figure shows the transmitter button layout, the corresponding fixed
numbering for the buttons, and an example custom engraved button panel.
CRESTRON
POWER
VOL UME
CHANNEL
MUTE
30
29
28
27
26
25
21
22
23
24
20
19
18
17
13
14
15
16
12
11
10
9
5
6
7
8
4
3
2
1
By comparing the example button panel (shown with the button join numbers) to the
button layout, it is seen that button 1 is used for POWER, buttons 4 and 8 are used
for VOLUME, buttons 9 and 10 (are used for CHANNEL, and button 12 is used for
MUTE.
Use the Engraving Software package, Version 1.1.1.6 or later, available from the
Downloads | Software Updates section of the Crestron website (
www.crestron.com
)
to design a unique button panel.
The Help file included with the software package provides detailed step-by-step
instructions for selecting the buttons and their color, entering the legends, and
selecting the color of the button panel, and allows you to print the design just as it
appears on the screen (except for the panel color, which for clarity is always printed
white).
Once the design is complete, the software package provides an easy link to submit
the design to Crestron for processing and engraving. Omission of unused buttons is
standard.
NOTE:
Recall that for the CNRFHT-15A transmitter, you may select up to 15 of
the 30 buttons; for the CNRFHT-30A, you may select all 30 buttons.
12
•
Hand-Held Wireless Transmitter: CNRFHT-15A/30A
Operations Guide – DOC. 8092A
