Crestron
CNRFHT-15A/30A
Hand-Held Wireless Transmitters
Hand-Held Wireless Transmitter:
CNRFHT-15A/30A
Introduction
The CNRFHT-15A/30A is a compact, lightweight, hand-held wireless RF
transmitter. Designed to operate in conjunction with the CNRFGWA 1-way RF
gateway/receiver to communicate with a Cresnet control system, it is an ideal user
interface to control audio, video, and lighting in a boardroom or conference room.
The hand-held transmitter is available with 15 or 30 button controls, and both
configurations are also available in an international version. The –30A configuration
permits full use of all 30 available buttons; the –15A configuration permits use of
any 15 of the 30 available buttons (refer to “Custom Button Panel Engraving” on
page 12 for details). Pressing any button on the customized 15- or 30-button panel
initiates an RF signal transmission of the button’s join number to the CNRFGWA.
The hand-held transmitters are continually in a power-saving sleep mode to extend
battery life. The unit activates immediately when a button is pressed; it is not
necessary to hold down a button.
Functional Summary
•
Available in a 15- or 30-button customizable configuration
•
Power-saving “sleep” mode; immediate activation upon button
press
•
Includes custom engraving, colored button caps, plus a choice
of button configurations and panel finishes
•
1-Way RF Communication via the CNRFGWA gateway, range
up to 300 feet
Operations Guide – DOC. 8092A
Hand-Held Wireless Transmitter: CNRFHT-15A/30A
•
1
