Single Gang Keypads
Crestron
CNX-B2/B4/B6/B8/B12
28
•
Single Gang Keypads: CNX-B2/B4/B6/B8/B12
Operations & Installation Guide - DOC. 8173A
“Send Program” Window
4. To verify that the program has been transferred successfully,
select
Diagnostics
|
Report Program Information
. This
should display a window that provides details about the
current program loaded into the control system.
Uploading a VT Pro-e WAV File Project
The CNX-B12
keypad source
file has the
extension .vtp.
A compiled VT
Pro-e file has
the extension
hex.
The VT Pro-e project file can be uploaded to the keypad using
VT Pro-e or via the Crestron Viewport.
Upload via VT Pro-e
1. Start VT Pro-e.
2. Select
File | Open | Project
to view the “Open” window,
navigate to the VT Pro-e file (.hex), and click
Open
.
3. Select
File | Upload Project
.
Upload via Crestron Viewport
1. Verify that the procedure for “Communication Settings” that
begins on page 23 has been performed.
2. As shown after this step, select
File Transfer | Send
Touchpanel
from the Viewport menu.
