Single Gang Keypads
Crestron
CNX-B2/B4/B6/B8/B12
4
•
Single Gang Keypads: CNX-B2/B4/B6/B8/B12
Operations & Installation Guide - DOC. 8173A
4. The latest software versions can be obtained from the Downloads | Software
Updates section of the Crestron website (
following these footnotes.
5. Crestron 2-Series control systems include the AV2, CP2/CP2E, MP2/MP2E,
PAC2, PRO2 and RACK2.
6. CNX update files are required for either CNMSX-AV/Pro or CNRACKX/-DP.
Filenames for CNX update files have a UPZ extension, and ST-CP files are in one
EXE or zipped UPZ file. To avoid program problems, make sure you are using
the update file with the correct suffix letter (e.g., S, V, W, X).
7. The depth of the Keypad is listed without the Cresnet connector (approximately
0.45 in)
plus
clearance for the wiring.
NOTE
: Crestron software and any files on the website are for
Authorized Crestron dealers and Crestron Authorized Independent
Programmers (CAIP) only. New users may be required to register to
obtain access to certain areas of the site (including the FTP site).
Physical Description
Refer to the figures on pages 5 and 6. The number of buttons on a keypad
can be 2, 4, 6, 8, or 12. They are arranged numerically from left to right,
top to bottom and each has an associated LED window.
NOTE:
The
Keypad Physical Views
illustrations show examples of 12-
button and 8-button keypads; other models have different configurations.
Refer to the button arrangement illustration on page 19.
The removable faceplate and divider attach to the button unit once it is
mounted.
Each keypad has a button unit with a membrane switch, a rear speaker,
and a male Cresnet network port labeled 24 Y Z G. The port provides for
operating power and for communications to/from the keypad.
