Crestron
CNXTA
CNX Telephone Audio Interface Card
6. Again,
select
Edit | Insert File
as shown below.
Insert Another WAV File
7. Browse to the directory or folder that contains the next WAV file to be
inserted, and open the file.
8. Repeat the above three steps until all desired files have been inserted.
9. Proceed to “Set WAV File or Message Properties, Save, and Exit”
below. To create another message, follow that procedure to step 9.
Set WAV File or Message Properties, Save, and Exit
NOTE:
The following procedure assumes that Sound Recorder is open.
NOTE:
Although there are alternative methods for selecting the commands of the
application, the following procedure uses the PC mouse and pull-down Menu Bar.
To set the WAV file (or message) properties, save the file, and exit Sound Recorder,
perform the following procedure:
1. Select
File | Properties
as shown below.
Access File Properties
Operations & Installation Guide - DOC. 8144A
CNX Telephone Audio Interface Card: CNXTA
•
11
Summary of Contents for CNXTA
Page 1: ...Crestron CNXTA CNX Telephone Audio Interface Card Operations Installation Guide ...
Page 2: ......
Page 4: ......
