Mount the Roller Shade Assembly
CAUTIONS:
l
There is risk of personal injury and equipment damage if the shade or
associated parts fall during installation. Use care when mounting.
Use proper mounting hardware (e.g., screws or bolts) for the
mounting surface when securing the brackets to the surface.
l
Proper installation of shades requires two or more people. Large
shades and medium-sized coupled shades will require three people.
Once the mounting brackets are installed, mount the roller shade
assembly:
1. Insert the idler pin into the top of the keyhole on the right bracket, and
slide it down into the keyhole. The idler pin sits on the vertical
adjustment screw.
Insert the Idler Pin into the Keyhole
2. Raise the motor end of the roller shade assembly to the motor
bracket.
3. Push the roller shade assembly toward the idler bracket to compress
the spring on the idler pin.
4. Push the tab on the motor assembly into the hole in the motor
bracket. When the shade is properly seated, the two clips spring down
to secure the motor to the bracket. Make sure that the shade is
properly mounted before letting go.
Secure the Motor to the Motor Bracket
3
CS-SHADE-ROLLER-BATT
Quick Start
Shade Motor and Hardware for CS-SHADE-ROLLER-BATT with CSA-DECOR3 Brackets
