Crestron
CWD7567
Two-Way RF Transceiver Module
Operations Guide - DOC. 7019A
Two-Way RF Transceiver Module: CWD7567
•
3
CWD7567 Detail Views
FRONT
SIDE
BACK
Antenna
10-pin Mating
Connector
PCB with Radio
9
10
1
2
Ports
The module contains a 10-pin connector. Refer to the diagrams and descriptions that follow.
Power/I-O
The 10 pin connector provides power to the module as well as communications between the module
and wired devices. Refer to the following table for pin assignments of the module interface connector.
9
10
1
2
NOTE:
Pin 1 provides power to the circuit card.
Power/I-O Pinout Signals
Pin #
Signal
Pin #
Signal
1
+5V
6
PWM
2
RELAY_ON
7
DISABLE_SINK
3
DISABLE_SOURCE
8
3.0V
4
RELAY_OFF
9
GND
5
ANALOG_FB
10
GND
